nd-industrial-enclosures-topwb

Connector Shell / Housing

nd-industrial-enclosures-grb 

woehr_logo_ND_1
Home
Aluminum Enclosures
Plastic enclosures

 

 

Enclosures Survey
Connector shells SG001
Connector shells SG002
Connector shells SG003
FAQ-connector shells

 

 

send an email  to info@industrial-enclosures.com

Hier können Sie den Acrobat Reader herunterladen

Connector shells in various forms. Please click on the links on the left to get more detailed information.

SG001-USB-comp

These connector shells of non structured light grey or transparent plastic are especially appropriate for USB-keychain, USB-dongles or general USB-periphery.
To ensure an easy and fast assembling, the enclosure parts can be jointed screw-less (snap-in) or glued (GH02SG001/510 and GH002SG001/520). Because of this construction there is more room for your electronics inside cause a dome or similar can be dropped.
Bigger enclosures, which can be jointed with screws or glued are available in the colours light grey, black, blue, red, yellow and transparent blue (GH02SG001/600 to GH02SG001/651).
Marks or labels can be sticked into the recesses on the sides of the enclosure.
Customer specific modifications are possible (other colours, treatments…)

 

 

Connector Shell / Housing

These connector shells are made of black high-impact ABS synthetic material UL94-VO and are supplied with steel knurled screws that can be screwed down without tools.
The cable bushing is located at the side or at the top.

Optionally available as metallized version.

To be used exclusively with metal connectors.

 

 

Connector Shell / Housing

These connector shells are made of black high-impact ABS synthetic material UL94-VO and are supplied with flat steel knurled screws that can be screwed down without tools,
as well as with two brass bushs to secure the knurling.

Optionally available as metallized version.

Available for metal connectors only.

 

 

Connector Shell / Housing

The connector shells of the series GH02SG003...  are low-cost empty enclosures with or without injection-moulded connector; this series is especially designed for connector power supply units/charging sets.
This very versatile and funtional product line comprises versions

  • for German 220V/230V-sockets
  • shock-proof plugs
  • Euro connectors
  • US connectors
  • Swiss connectors
  • GB connectors
  • with or without ventilation slots
  • made of UL-listed, antistatic synthetic material

Special versions available – you are welcome to ask!

Here you will find a wide range of connector shells ==>

ABS  Connector Shell / Housing

 

 

Enclosures Survey   Aluminum Enclosures   Plastic enclosures 

© 1999-2009 Richard Wöhr GmbH    Gräfenau 58-60   D-75339 Höfen/Enz  Update: 28/04/09

Tel: ++49(0)7081/9540-0

Fax: ++49(0)7081/9540-90

Email: enclosures@woehrgmbh.de

RPF-Netdesign