|
Description
|
part number
|
|
Plexiglass for 4.8˝ display
|
GH02KS101/Zub101
|
|
Touch-screen for 4.8˝- monitor housing
|
GH02KS101/Zub102
|
|
Plexiglass for 5.6˝ display
|
GH02KS101/Zub103
|
|
Touch-screen for 5.6˝ display
|
GH02KS101/Zub104
|
|
Plexiglass for 6.4˝ display (middle and left), standard 1.5 mm thick
|
GH02KS101/Zub105
|
|
Touch-screen for 6.4˝ display
|
GH02KS101/Zub106
|
|
Plexiglass for 16:9 display (middle), 1.5 mm thick
|
GH02KS101/Zub107
|
|
Plexiglass for 10.4˝ display, 2.5 mm not coated
|
GH02KS101/Zub108
|
|
Plexiglass for 10.4˝ display, 3.0 mm coated
|
GH02KS101/Zub109
|
|
Touch-screen for 10.4˝ display
|
GH02KS101/Zub110
|
|
Sealing kit for housing (sealing cord and sealing rings)
|
GH02KS101/Zub151
|
|
Foil keyboard standard execution 4 keys
|
GH02KS101/Zub201
|
|
Foil keyboard standard execution 6 keys (customised layout possible)
|
GH02KS101/Zub202
|
|
Foil keyboard standard execution, 12 keys
|
GH02KS101/Zub203
|
|
Foil keyboard standard, 9 keys (right)
|
GH02KS101/Zub204
|
|
Foil keyboard standard, 9 keys (left)
|
GH02KS101/Zub205
|
|
Foil keyboard standard, 18 keys (left; for housings with monitor right)
|
GH02KS101/Zub206
|
|
Foil direct connector, 8-pin, bent, on printed circuit board for foil keyboard
|
GH02KS101/Zub241
|
|
Foil direct connector, 9-pin, bent, on printed circuit board for foil keyboard
|
GH02KS101/Zub242
|
|
Keypad, 4 keys (base plate without front foil)
|
GH02KS101/Zub251
|
|
Keypad, 6 keys (base plate without front foil)
|
GH02KS101/Zub252
|
|
Spiral cable, 6-pin Mini-DIN connector, screened (black)
|
GH02KS101/Zub281
|
|
Spiral cable, 6-pin Mini-DIN-connector, screened (light grey)
|
GH02KS101/Zub282
|
|
Graphics LCD 4.7˝/ 4.8˝ with extended temperature range
|
GH02KS101/Zub321
|
|
Graphics LCD, 5.6˝/5.7˝
|
GH02KS101/Zub322
|
|
Graphics LCD, 6.4˝
|
GH02KS101/Zub323
|
|
Graphics LCD 10.4˝
|
GH02KS101/Zub324
|
|
Support band for LCD, 25 m x 5 mm x 0.4 mm
|
GH02KS101/Zub341
|
|
CFL Backlight Inverter 3,3 VDC
|
GH02KS101/Zub342
|
|
Small parts for fastening the 4.7˝ LCD-display
|
GH02KS101/Zub343
|
|
Frame for LCD - middle window, standard
|
GH02KS101/Zub344
|
|
Frame for LCD - window left side
|
GH02KS101/Zub345
|
|
Frame for LCD – middle: NEC and Unipac
|
GH02KS101/Zub346
|
|
Frame for LCD – middle: LG, PHILIPS, SAMSUNG
|
GH02KS101/Zub347
|
|
Frame for LCD – right: SHARP
|
GH02KS101/Zub348
|
|
Frame for LCD – right: NAN YA
|
GH02KS101/Zub349
|
|
Small parts for the fastening of the 10.4˝ LCD-display
|
GH02KS101/Zub350
|
|
CPU: Intel® Xscale PXA 255
|
GH02KS101/Zub381
|
|
Lid (top) with aperture for scanner housing (light grey)
|
GH02KS101/Zub450
|
|
Lid (top) with aperture for scanner housing (black)
|
GH02KS101/Zub451
|
|
Lid (top) with aperture for scanner housing (Beki-Shield)
|
GH02KS101/Zub452
|
|
GSM - Antenna
|
GH02KS101/Zub510
|
|
GPS - Antenna
|
GH02KS101/Zub520
|
|
GPS – Modul mit Patch-Antenne
|
GH02KS101/Zub521
|
|
1D-Scanner
|
GH02KS101/Zub530
|
|
fixation plate for 1D-Scanner
|
GH02KS101/Zub531
|
|
Acrylglas für 1D-Scanner (rot)
|
GH02KS101/Zub532
|
|
2D-Scanner
|
GH02KS101/Zub533
|
|
Acrylglas für 2D-Scanner (glasklar)
|
GH02KS101/Zub534
|
|
Biometrische Fingerprint-Erkennung
|
GH02KS101/Zub535
|
|
Card reader
|
GH02KS101/Zub540
|
|
Magnet for touch-stick, hard ferrite, diemsnions: 30 x 12 x 7 mm
|
GH02KS101/Zub671
|
|
Magnet for touch-stick, NdFeB 210/220, dimensions: 20 x 6.25 x 1.6 mm
|
GH02KS101/Zub672
|
|
Touch-stick – blue
|
GH02KS101/Zub67b
|
|
Touch-stick – golden
|
GH02KS101/Zub67g
|
|
Touch-stick – ecru (Alu)
|
GH02KS101/Zub67n
|
|
Touch-stick – orange
|
GH02KS101/Zub67o
|
|
Touch-stick – red
|
GH02KS101/Zub67r
|
|
Touch-stick – black
|
GH02KS101/Zub67s
|
|
Swivel joint
|
GH02KS101/Zub701
|
|
Globe joint
|
GH02KS101/Zub702
|
|
Aluminum plate (on the inside for reinforcing with car holders)
|
GH02KS101/Zub703
|
|
Wall mounting plate (light grey)
|
GH02KS101/Zub710
|
|
Wall mounting plate (black)
|
GH02KS101/Zub711
|
|
Belt clip
|
GH02KS101/Zub770
|
|
Load socket 2-pol, soldering execution
|
GH02KS101/Zub781
|
|
Plug bracket plate, 1.0 mm for plugs; Break-throughs acc. customer spec.
|
GH02KS101/Zub783
|
|
Connector angle plate, 1.0 mm for connector; apertures acc. to customer’s specifications upon request
|
GH02KS101/Zub783
|
|
Clamp for the attachment of the baseplate
|
GH02KS101/Zub860
|
|
Contact 3, nickel-plated, for ground plate acumulator-housing
|
GH02KS101/Zub861
|
|
Contact 4, nickel-plated, für Akku-Gehäuse
|
GH02KS101/Zub862
|
|
Intermediate frame, H = 25 mm (light grey)
|
GH02KS101/Zub863
|
|
Intermediate frame, H = 25 mm (black)
|
GH02KS101/Zub864
|
|
Special screws for 1 intermediate frame
|
GH02KS101/Zub865
|
|
Special screws for 2 intermediate frame
|
GH02KS101/Zub866
|
|
Plug power pack as battery charger
|
GH02KS101/Zub961
|
|
Loudspeaker, diameter 32 mm, max. 1 Watt
|
GH02KS101/Zub981
|
|
Rechargeable battery packs for housing
|
Rechargeable
battery pack
|
|
Antennas and scanner housings with accessories
|
Scanner housing
|
|
Drill-holes for controllers on the frame are customer-specific
|
upon request
|
|
EMC – protection by material: ABS with Beki Shield
|
upon request
|
|
EMC - protection by varnish
|
Upon request
|
|
Housing in black varnish (surface bright)
|
upon request
|
|
Housing in further colours
|
upon request
|
|
Housings in further colours
|
upon request
|
