|
The shielding enclosures of the series GH02AG are especially suited for EMC- or RF-shielding,
e.g. for filter enclosures, RF-shielding, EMC-shielding, adapters, couplers...
This applies to high frequencies as well as to low ones. These enclosures are made of sheet steel which is either fire-tinned or electrolytically tinned and thus easy to solder.
The shielding enclosures have a removable lid to guarantee easy access to the electronics on the inside.
Customer-specific modifications are possible at any time.
|
|
Shielding enclosures series GH02AG001
|
|
|
The electrically conductive connection is ensured via springs mounted on the lid. Plug-in plates are available to make it possible to partition the enclosures into different sections which are shielded from one another.
The lids of these shielding enclosures are equipped with openings for the easy wiring of the assembly. Further information ==>
|
|
Shielding enclosures series GH02AG002
|
|
|
The electrically conductive connection is established by slipping-on.
By soldering on the lid, the shielding enclosures can be closed hermetically.
Further information ==>
|
|
Shielding enclosures series GH02AG003
|
|
|
Shielding enclosures/filter enclosures for couplers, filters, separating filters, adapters, probes a.m.m.
These tinplate enclosures (1 body and 2 lids) are made of 0,5mm tinplate and can easily be soldered. Thus a good RF–SHIELDING for universal use is ensured. Other materials are possible.
Further information ==>
|
|
Shielding enclosures series GH02AG004
|
|
|
Shielding enclosures/filter enclosures for couplers, filters, separating filters, adapters, probes a.m.m.
These tinplate enclosures (1 bottom part and 1 lid) are made of 0,5mm tinplate and can easily be soldered. Thus a good RF–SHIELDING for universal use is ensured. Other materials are possible.
Further information ==>
|
Aluminum enclosure GH02AL002 as Shielding Enclosure |
|
|
Aluminum enclosure with a very interesting cost-performance ratio. Ideal as solid distribution box as well as for the most varied applications. Light-weight. Can easily be processed by machine.
The continuous flange at the lid guarantees a very good closeness. Also with cast-on wall latches (starting from article number GH0AL002/510...)
Further information ==>
|
