|
 This new enclosure series is as standard supplied with ventilation slots and is designed for forward-looking applications as e.g. LON-devices, modules for building-automation and equipment, light regulations, control technique, high-voltage protectors.....
This enclosure series is easily mounted on the DIN-top hat rails and its installation width is only 17,5mm.
For the assembly of the enclosure components no screws are required. The plates which are already equipped with connectors and components are simply inserted, then the parts of the enclosure are joint with clips.
The cables can be connected with usual 3-pin terminal screws which can be provided by us.
Inside the enclosure, there is enough space for one horizontally mounted board or for vertical boards, if components with considerable height (e.g. transformers, relays...) are to be included.
The front panel can be processed according to the customer’s specifications in order to include e.g. connectors, LEDs and switches. Moreover, various forms of finishing re available at low cost, such as silk screen printing, varnishing, front foils or foil keyboards.
The enclosure is suitable for a max. current of 25A and is as standard delivered in fine light grey ABS-synthetic material, which is self-extinguishing acc. to UL94-V0.
UPPER SECTION:
- from plastic ABS Ul94-v0, self-extinguishing
- colour: Ral 7035 light-grey
- temperature range: up to +70 degrees Celsius
- width 22,5mm, for 2 modules
- without clamps
- screwable, with louvers
Bolting device:
- from plastic Delrin
- colour: Ral 7021 black-grey
- temperature range: up to +85 degrees Celsius
- max. wire strength 2x2,5qmm
|
